Types of LED signs

In recent years, pulse LED signs are used on highways to give drivers notice of the information on the road. There are several types of LED signs depending on the application:

Type of the sign
Characteristics
Price
 

 Pulse LED sign (standard size II)

Traffic sign (4.2.1, 4.2.2, 4.2.3) with light indication is intended to mean a detour in the area of ​​road works.
Tape type - А
Galvanised substrate.
Diameter: 700 mm
Supply voltage: 12-16 V
Current type: direct, no more than 0,2 А
Weight: 6,4 kg

 7 600 rub.
 

 Pulse LED sign (standard size III)

Traffic sign (4.2.1, 4.2.2, 4.2.3) with light indication is intended to mean a detour in the area of ​​road works.
Tape type- А
Galvanised substrate.
Diameter: 900 mm
Supply voltage: 12-16 V
Current type: direct, no more than 0,4 А
Weight: 10,2 kg

 12 500 rub.
 

 Pulse LED sign (standard size II)

Traffic sign (4.2.1, 4.2.2, 4.2.3) with light indication is intended to mean a detour in the area of ​​road works.
Tape type - diamond B
Galvanised substrate.
Diameter: 900 mm
Supply voltage: 12-16 V
Current type: direct, no more than 0,5 А
Weight: 10,2 kg
Power cable with clips - 5 m
Arrow - turning
Operating mode - blinking, always on (switched by three-position toggle switch)
Weight : 18 kg

 (standard size III)

on the board 1000х1000mm

20 300 rub.

(standard size IV)

on the board 1200х1200mm

25 400 rub.

 

  LED traffic sign 4.2.1 to be installed on vehicles (standard size III)

(indoor and outdoor fairing)

Power: 12-16 V
Frame for a trailer

LED signs included
Traffic sign 4.2.1 "Right bypass" - 4 000 r.;

Traffic sign 1.34.1 "Turning direction" - 2 000 r.,

Battery Box - 1 pc.,
Magazine for 10 signs 2 000 r.

 
 

  LED traffic sign 2.5 (standard sign III)

 

 
 

 Power supply IP-12 V for LED traffic signs

Rechargeable battery with 3-5 years of service life in standby or more than 260 charge-discharge cycles in a cyclic mode at 100% discharge. The battery is rechargeable, highly efficient, non-spillable and free of maintenance. The battery needs recharging before using. Perfect for powering LED signs, as well as garlands made ​​of LED lights with the FS-12.
Main technical characteristics:
Dimensions: 155 х 98 х 100 mm
Rated voltage: 12V
Capacity: 12 ampere-hours
Weight: 4 kg
Work period - about 72 hours.

 
 

 Matching device for pulse traffic signs

Matching device 220/12 is intended to power the LED signs (2,3,3-1,4) and signal lights FS-12, FDR-1.
Main technical characteristics:
Body: Aluminum, sealed.
Power: 15 W, Uin=110-250VAC, Uout=12VDC, Iout=1,2 А.
Dimensions: 160 x 26 x 27 mm
Weight: 0,17 kg.

 
 

 LED traffic sign with variable information for the visualization of alerts.

The sign prohibiting freight transport motion

 
 

 LED traffic sign with variable information for the visualization of alerts.

Danger warning sign

 
1993-2018 "IntelTranS"
Website created by: IntelWeb
e-mail: info@its-spc.ru
Tel.: (846) 922 79 78; (846) 203 78 91